Products
UV Guard S Series
(UV Guard Australia Pty Ltd)
Protect your water from pathogens and disease with the UV-Guard S series, UV
disinfection systems for drinking water, process water, warm water and waste
water.
Damage to micro-organism DNA by UV
(254nm) causes inactivation so the
pathogen cannot replicate to cause harm.
Benefits of UV-Guard
- * No micro-organism is known to be immune to UV.
- * Economical and efficient operation
- * No harmful by-products – environmentally friendly
- * No risk of overdosing
- * Proven performance
- * Easy maintenance
Standard Features of UV-Guard S series
- 316 grade stainless steel electro-polished reactor
- BSP threaded connections
- View / UV sensor port
- Easy to install brackets (except for S2)
- Lamp fail alarm
- Efficient, high intensity, low pressure UV lamps
- Lamps parallel to water flow
Options:
- Lamp life run counter
- Lamp change alert
- UV intensity monitor
- Quartz wiping system for some units
TABLE 1. For high UVT applications (potable and process water)
Model |
Flow Rate approx.* |
Connection |
Lamp Power (w) |
Dimensions mm** |
|
S2 |
2m3/h |
¾” male |
30 |
590l x 65h x 130w |
|
S3 |
2.7m3/h |
1” male |
40 |
970l x 126h x 190w |
|
S4 |
3.6m3/h |
1½” male |
40 |
970l x 136h x 190w |
|
S7 |
6.8m3/h |
2” male BSP |
80 |
970l x 136h x 190w |
|
S8 |
7.2m3/h |
2” male BSP |
40x2 |
970l x 126h x 290w |
|
S10 |
10.2m3/h |
2” male BSP |
120 |
1285l x 136h x 190w |
|
S17 |
13.7m3/h |
2” male BSP |
160 |
1285l x 136h x 190w |
|
S30 |
26m3/h*** |
2” male BSP |
160x2 |
1285l x 136h x 300w |
|
S60 |
26m3/h*** |
2” male BSP |
160x4 |
1285l x 136h x 600w |
|
TABLE 2. For low UVT applications (wastewater)
Model |
Flow Rate approx.* |
Connection |
Lamp Power (W) |
Dimensions mm ** |
S2 |
1.5m3/h |
¾” male BSP |
30 |
590l x 65h x 130w |
S3 |
2m3/h |
1” male BSP |
40 |
970l x 126h x 190w |
S7 |
4.6m3/h |
2” male BSP |
80 |
970l x 136h x 190w |
S8 |
4m3/h |
2” male BSP |
40x2 |
970l x 126h x 290w |
S17 |
9.2m3/h |
2” male BSP |
160 |
1285l x 136h x 190w |
S30 |
18.4m3/h |
2” male BSP |
160x2 |
1285l x 136h x 300w |
S60 |
26m3/h** |
2” male BSP |
160x4 |
1285l x 136h x 600w |
* Peak flow depends on optical transmission and performance requirements. Contact your dealer for correct sizing. For Table 1, peak flow based on 250 J/m2 with UVT of 98% at 254nm. For Table 2, peak flow based on 250 J/m2 with UVT of 75% at 254nm.
** Dimensions are approximate and subject to change without notice.
*** Hydraulic limit
08/08 Information contained in this brochure is subject to change without notice and shall not be used to create any liability on the part of UV-Guard Australia Pty Ltd. Republication of this brochure is permitted with the consent of UV-Guard Australia Pty Ltd.